Classi Waterproofing Kit Wetrooms
for Shower Tray and Baths
To many people the thought of putting in a wet room showering area is dismissed because of the problems with waterproofing. With our Classi Waterproofing Kit for Wetrooms you can have a wet room in any room of your house. It is down to personal preference how the correct fall to the waste is achieved, either by using a wet room former tray or having your installer screed the fall to the waste, generally on a wooden floor a former tray will be used.
Having created the fall to the waste, you apply C2 tile adhesive to the floor with a 4mm square notch trowel. Overlay the membrane and with the back of the trowel expel all air. Special wastes are available that clamp around the membrane, ensuring that any water leaks get diverted down the gulley. Next apply the corner pieces, again on top of tile adhesive and expelling air. Next we join the floor to the wall with the corner and joint tape, and when completed we apply the membranes to the wall. Pipe collars are also included in the kit. Tiling can begin immediately in the normal way.
Points to note
All surfaces that have the waterproofing membrane applied should be primed, as per the tile adhesive manufacturer’s instructions.
C2 tile adhesive should be used to bond all membranes to the walls. Please see our FAQ section for an explanation on what kind of tile adhesive to use.
Click here to find out what size of kit you need for your Wetroom Waterproofing project.
Find Your Nearest Stockist
Find a Classi Stockist Near Youfind now
Classi Waterproofing for Wetrooms Large Kit, for wall and floor area 11.1m²£293.92inc. VATAdd to Basket
Classi Waterproofing for Wetrooms Medium Kit, for wall and floor area 8.2m²£227.44inc. VATAdd to Basket
Classi Waterproofing for Wetrooms Small Kit, for wall and floor area 6.5m²£194.80inc. VATAdd to Basket